| |
|
Drive a local device directly from the PacketBand.
The PacketBand-TDM-4 DC versions are now available with optional support for PoE. One of the PacketBand’s Ethernet ports can now power an attached device, such as a wireless. |
| • |
Meets the IEEE 802.3af PoE controller specification |
| • |
15W max |
| • |
10/100 Mbits |
| • |
Input Vmin=36V –Vmax=72V |
| • |
Output 46- 51V nominal DC output loop through pins 4,5 and 7,8 @ 0.46A |
|
• |
MIDSPAN collision detection avoidance |
|
• |
Electrical isolation in accordance with SELV circuits and to satisfy Telecoms Approvals |
|
• |
Polarity protection |
|
• |
Excellent power signal |
|
• |
Short circuit current limiting with Fault Status LED |
|
|
|
The PacketBand-TDM-4 with PoE comes in a slightly larger chassis than the non-PoE units |
|
|
|
• |
W – 292; D – 200; H – 44mm |
|
• |
|
|
